New MXT 55 Ton Stretch - Both Alabama and Florida locations
Capacity: 55 tons in 16 ft. 0 in. (closed position) length with fourth axle close coupled or single axle stinger--GAWR and tire ratings determine legal payloads
Load Base: Sixteen foot rigid 2 point load centered in deck when deck is fully closed. Note: Only rigid self supporting loads
when deck is open. The load base becomes the open deck minus 2 ft.
Framework: All main longitudinal members fabricated with 100,000# minimum yield steel flanges
Gooseneck Design: Hydraulic removable non ground bearing design
Loaded Fifth Wheel Height: 50 in. nominal with 5 ride height positions
Swing Radius: 102 in. (11 ft. 11 in. overall gooseneck length)
Alternate Kingpin: Removable kingpin at 102 in. radius
Flip Box: Optional 23 inch flip box
Power Source: 13 HP (min.) Gasoline powered auxiliary power unit
Electrical receptacle: J560 seven pin connector
Deck Design: Flat Level Telescopic Deck Design
Deck Length: 29 feet clear deck length (retracted); 50 feet (extended) ** NOTE: Trailer is over 53 feet in length
Loaded deck height: Deck: 20 in. Ground Clearance: 6 in.
Flooring: 2 inch nominal Apitong wood
Front ramps: None, front of deck sloped top down to assist in loading with traction cleats
Front bogie ramp: Included
Extension Brackets: (14) pair removable swing type; (1) pair removable hook on type
Deck to Bogie Connection: Modular
Other Deck Specifications: Telescopic Deck Design Crossmember Spacing outboard mainbeams 11.75 in c/c
Number of Axles: 3
Axle Capacity: 25,000 lb. nominal capacity per axle NOTE: GAWR determined by suspension type, brakes, tires and other components.
Axle Spread: 60 inches (between axles) Adds 11 inches of overall length
Dust Shields: None
Brakes: 16-1/2 in. x 7 in. with 5.5 in. autoslacks; heavy duty brake drums; outboard mount
Suspension: Air ride
First Axle Lift: Chain Lift
Third Axle Lift: Air lift
Compatibility: Designed to accept 55/60 rear axle, spreader and/or 23 inch flip box -
Tires: 275/70R 22.5 OEM Standard
Wheels: 8.25 x 22.5 LvL One buffed outside/steel disc inside - hub-piloted
Bolsters: Recessed load bearing between all axles and rear of last axle
Covered Rear Bogie: None
Rear Bogie Height: 40 7/8 in.
Boom Trough: V style boom trough with bolt-in V pan
Mechanical Ride Height Control: Mechanical ride height control valve (Whittle Style)
Manual Dump Valve: Manual Dump Valve (Push Pull)
Bumper: Heavy duty v-style rear bumper
Electrical System: DOT sealed beam and harness with LED lights and 4 inch flush mounted battery powered amber strobes
Call For Price
*Monthly payment stated above assumes a secured commercial use loan transaction available for highly qualified commercial loan applicants. Actual loan payment amount and terms may vary. Consumer financing not available for consumers residing in Nevada. Additional state restrictions may apply. Equal opportunity lender. Click here for more state licenses and disclosures. NMLS ID: 1857954. VERMONT RESIDENTS: THIS IS A LOAN SOLICITATION ONLY. CurrencyFinance IS NOT THE LENDER. INFORMATION RECEIVED WILL BE SHARED WITH ONE OR MORE THIRD PARTIES IN CONNECTION WITH YOUR LOAN INQUIRY. THE LENDER MAY NOT BE SUBJECT TO ALL VERMONT LENDING LAWS. THE LENDER MAY BE SUBJECT TO FEDERAL LENDING LAWS. CALIFORNIA RESIDENTS: Financing provided or arranged by Express Tech-Financing, LLC dba Currency pursuant to California Finance Lender License #60DBO54873
Your current browser cannot run our content, please make sure your browser is fully updated or try one of the browsers below.