Aldura 130BBL Vacuum Steel Trailer Non-code
Capacity: 5,460 gal. + 2% Expansion
Commodity: Transportation of oilfield fluids such as water, mud, oil field waste.
Design Pressure: 17 PSI, tested at 23 PSI
Overall Length: 42 ft.
Height: 10' 5"
Weight: 17,350 lbs
Width: 102 in
Material: A-36 Carbon Steel
Suspension: Air suspension 60,000 lbs. capacity
Baffles: Two (2) of 1/4 in.
Bulkheads: 1/4 in. Non-Code ASME Shape
Compartments: Single
Overturn Protection: One (1), at back of tank
Shell: 1/4 in. A-36 Steel
Stiffeners: Eight (8) rolled of 3 in. C-channel profile
Welding: Inside and out, minimal tie-ins with mig welding
Outlet: Two (2) 4 in. butterfly valves at rear
Shut Off: Ball type primary in front manway and ball type secondary 12 Gal. on driver's side front with drain
Venting/Reliefs: 1-1/2" vacuum relief (370 CFM), 2" pressure relief (Adjustable, set at 10psi), both located at the top front of barrel; 2" blow down line at rear
Axles: Two (2) 30,000 lbs. each, wide, 77.5 in. track TP type with automatic slack adjuster
Brakes: Air brakes with two boosters FMVSS-121, ABS 4S/2M Bendix anti-lock brake system
Bumper: 6 in. X 4 in. tube per DOT
Frame: Full Length 3/16 in. Formed
Landing Gear: One (1) AMPRO28-JT
Tires: Eight (8) 11 X 22.5 R tires
Upper Coupler: Adjustable plate with king pin
Access Ladder: Two (2) stairway in the rear with thru-tread steps and in the middle of the tank
Manways: Two (2) on top of the tank , one (1) on the rear bulkhead and one (1) on top front. All of 20 in. domed style with plates swing bolts and wing nuts
Walkway: Driver's side tank length through-treaded walkway with toe-kicks and handrails
External Coating: Hempel two coats of polyurethane on an epoxy primer
Internal Liner: Hempel epoxy liner
Paint Prep: All steel surfaces shotblasted inside and out
Conspicuity tape: 3M Per DOT
Hose tray: Formed hose tray (10 GA) with 10 gauge brackets on both sides. throughout the tank
Lights: Sealed harness and LED lights per DOT. Two rear work lights with integrated switches
Mud Flaps: Four (4) anti-sail
Vacuum Manometer: One (1) located in the rear of the blow down line
Optional Fluid level: Level-sight rear or front located
Paint Color: Available in a variety of different colors
*Monthly payment stated above assumes a secured commercial use loan transaction available for highly qualified commercial loan applicants. Actual loan payment amount and terms may vary. Consumer financing not available for consumers residing in Nevada. Additional state restrictions may apply. Equal opportunity lender. Click here for more state licenses and disclosures. NMLS ID: 1857954. VERMONT RESIDENTS: THIS IS A LOAN SOLICITATION ONLY. CurrencyFinance IS NOT THE LENDER. INFORMATION RECEIVED WILL BE SHARED WITH ONE OR MORE THIRD PARTIES IN CONNECTION WITH YOUR LOAN INQUIRY. THE LENDER MAY NOT BE SUBJECT TO ALL VERMONT LENDING LAWS. THE LENDER MAY BE SUBJECT TO FEDERAL LENDING LAWS. CALIFORNIA RESIDENTS: Financing provided or arranged by Express Tech-Financing, LLC dba Currency pursuant to California Finance Lender License #60DBO54873
Your current browser cannot run our content, please make sure your browser is fully updated or try one of the browsers below.