Aldura 140BBL Vacuum Steel Trailer Non-code
Capacity: 5,880 gal. + 2% Expansion.
Commodity: Transportation of oilfield fluids such as water, mud, oil field waste.
Design Pressure: 17 PSI, tested at 23 PSI.
Overall Length: 42'.
Height: 10' 9".
Weight: 19,000 Lbs.
Width: 102".
Material: A-36 Carbon Steel.
Suspension: AMPRO Air suspension 60,000 lbs capacity.
Baffles:Three (3) of 1/4".
Bulkheads: 1/4" Non-Code ASME Shape.
Compartments: Single.
Shell: 1/4" A-36 Steel.
Stiffeners: Eleven (11) rolled of 3 in. C-channel profile.
Welding: Inside and out, minimal tie-ins with mig welding.
Outlet: Two (2) 4 in. butterfly valves at rear.
Shut Off: Ball type primary in front manway and ball type secondary 12 Gal. on driver's side front with drain
Venting/Reliefs: 1-1/2" vacuum relief (370 CFM), 2" pressure relief (Adjustable, set at 10psi), both located at the top front of barrel; 2" blow down line at rear
Axles: Two (2) 30,000 lbs. each, wide, 77.5 in. track TP type with automatic slack adjuster
Brakes: Air brakes with two booster.
Bumper: 4" X 3" tube.
Frame: Full Length 1/4" Formed.
Landing Gear: One (1) AMPRO28-JT.
Tires: Eight (8) 11 X 24.5.
Upper Coupler: 45 3/4" Height, Adjustable plate with king pin.
Access Ladder: Two (2) stairway in the rear with thru-tread steps and in the middle of the tank.
Manways: Three (3) on top of the tank , one (1) on the rear bulkhead. All of 20" domed style with plates swing bolts and wing nuts.
Walkway: Driver's side tank length through-treaded walkway with toe-kicks and handrails.
Internal Liner: Hempel epoxy liner.
Paint Prep: All steel surfaces shotblasted inside and out.
Conspicuity tape: 3M Per DOT.
Hose tray: Formed hose tray (10 GA) with 10 gauge brackets on both sides. throughout the tank, 59" top face to floor).
Lights: Sealed harness and LED lights per DOT. Two rear work lights with integrated switches.
Mud Flaps: Two (2) anti-sail.
Vacuum Manometer: One (1) located in the rear of the blow down line.
Optional Fluid level: Level-sight rear or front located.
Tool Box: 40" x 28 1/2" x 20"
*Monthly payment stated above assumes a secured commercial use loan transaction available for highly qualified commercial loan applicants. Actual loan payment amount and terms may vary. Consumer financing not available for consumers residing in Nevada. Additional state restrictions may apply. Equal opportunity lender. Click here for more state licenses and disclosures. NMLS ID: 1857954. VERMONT RESIDENTS: THIS IS A LOAN SOLICITATION ONLY. CurrencyFinance IS NOT THE LENDER. INFORMATION RECEIVED WILL BE SHARED WITH ONE OR MORE THIRD PARTIES IN CONNECTION WITH YOUR LOAN INQUIRY. THE LENDER MAY NOT BE SUBJECT TO ALL VERMONT LENDING LAWS. THE LENDER MAY BE SUBJECT TO FEDERAL LENDING LAWS. CALIFORNIA RESIDENTS: Financing provided or arranged by Express Tech-Financing, LLC dba Currency pursuant to California Finance Lender License #60DBO54873
Your current browser cannot run our content, please make sure your browser is fully updated or try one of the browsers below.
Get Financing
