Doepker Trombone Step Deck/ Drop Deck/Expandable Trailer
Used ones available for Rent, Sale or Rent To Own.*
Paint & Finish - Fully steel shot blasted - Pure zinc (galvanization) spray coating applied to bare steel (after blast) as per selected option - PPG Epoxy Primer - PPG topcoat (one color) - Continuous reflective tape PAINT CURE PROCESS WITH HEATED OVEN SYSTEM - Entire trailer placed in temperature controlled heated oven system to meet Doepker specific paint hardness and adhesion criteria NVIS data- Body Type: Trombone- Shipping Weight: 9400 kg (20,700lb)- GVWR: 40000 kg (88,200 lb)- Wheelbase: 13240mm (43ft 5in) Protective Features - Rear Doepker mudflaps Warranty - 5 Year main rail warranty ~ 100% parts & labour - Other structural warranty as follows: - Year 1 ~ 100% parts & labour - Year 2 ~ 100% parts & labour - Year 3 ~ 100% parts only - Year 4 ~ 50% parts only - Year 5 ~ 25% parts only
- 53' x 8 1/2' w/ Channel Outer Rail - Extension to 18' on 30" spacings with first extension at 36" - Main Rail Ratings: Distributed Load: approximately 36,300 kg (80,000 lbs) - Deck Height: approximately; gooseneck 67" and lower deck 38" - Coupler Height: 52" - Tare Weight: approximately 9,400 kg (20,600 lbs) including standard equipment and winches - GVWR: 40,000 kg (88,000 lbs) - Wheelbase: 12,776 mm (41'11") - Main Beams: Center Rail: Web: 1/4" x 25 1/2" high tensile steel; 5/16" Thick web on gooseneck; Flange (Front): 3/4" x 6" high tensile steel (top), 3/4" x 6" high tensile steel (bottom); Flange (Back): 3/4" x 6" high tensile steel - Crossmembers: 4" high tensile Jr. I beam on 12" centers where applicable - Knee bracing on 3' centers on lower deck where applicable - 7 pin pockets per side - Standard chassis is prepped for optional pullouts - Canada/U.S. serial plate * Safety Certified Bolt On Provisions (Stealth System) - "Stealth" mounts for future bolt on toolbox brackets and boxes located behind landing gear on D/S & C/S (mounts accept 48" length) - “Stealth” system to add future bolt on full width mud flaps in front of landing gear – Lead and Rear trailers - Toolboxes mounted as high as possible for more ground clearance - Toolboxes mounted as inset as possible to help prevent loading equipment from damaging toolboxes Lighting - LED lights as per CMVSS - 3/4" penny marker lights at front of trailer - 3/4" penny marker lights on sides of trailer - Oval signal lights (mid trailer) under side rails of trailer Suspension - Hendrickson 250US or approved equal - Angled hanger on front axle - Cam tube enclosures - 17.5in rims/tires must be paired with 12 ¼” drum or Pan17 disc brakes - 22.5in rims/tires must be paired with 16 ¼” drum or Pan19 disc brakes - 30/30 spring brakes - Anti lock braking system - Air system per CMVSS - Inline filters on air lines - Air ride complete with overstroke and dump valve, pressure gauge & window in door - Long stud hubs
AMVIC Licensed
*Pictures May Be Different Then Actual Product But Customization and Ordering can be Accommodated*
*Rent to own, Leasing and Purchase Options Available**
*
*Monthly payment stated above assumes a secured commercial use loan transaction available for highly qualified commercial loan applicants. Actual loan payment amount and terms may vary. Consumer financing not available for consumers residing in Nevada. Additional state restrictions may apply. Equal opportunity lender. Click here for more state licenses and disclosures. NMLS ID: 1857954. VERMONT RESIDENTS: THIS IS A LOAN SOLICITATION ONLY. CurrencyFinance IS NOT THE LENDER. INFORMATION RECEIVED WILL BE SHARED WITH ONE OR MORE THIRD PARTIES IN CONNECTION WITH YOUR LOAN INQUIRY. THE LENDER MAY NOT BE SUBJECT TO ALL VERMONT LENDING LAWS. THE LENDER MAY BE SUBJECT TO FEDERAL LENDING LAWS. CALIFORNIA RESIDENTS: Financing provided or arranged by Express Tech-Financing, LLC dba Currency pursuant to California Finance Lender License #60DBO54873
Your current browser cannot run our content, please make sure your browser is fully updated or try one of the browsers below.
Get Financing
