SANDSTORM Ready for all your Frac sand hauling. Electric opening system available as an option. CALL FOR PRICE!!!
Capacity:
575 cu. ft.
Design Pressure:
15 PSI - tested at 23 PSI
Overall Length:
34"
Height:
12' 10"
Width:
102 in.
Weight:
9,940 Lbs. approx.
Material:
Carbon Steel
Suspension:
Air Ride Hendrickson 60,000 lbs. capacity
Compartments:
Single
Hopper(s):
One (1) cone with 45° slope and aerators
Shell:
10 Gauge A36 High resistance steel
Product Valves:
One (1) 6" butterfly valve, steel body, cast iron disc and steel stem
Discharge Line:
4" steel pipe sch40 connected with cam style connectors. A sand discharge hose is arrached from the third tee to the bummper level,a female coupler is included at end . One (1) Steel Bottom -Drop BTI Sand 6" x " Tee
Walkway:
Toe-kicks on top
Loading Lines:
Two (2) 4" loading lines in the rear
Pressure Control:
3" butterfly valve to regulate hot airflow to product discharge line
Check valve:
First check valve in the hot air inlet line and second check valve in front of first tee.
Hose holder:
P.T.O. hose holder with mandrel located on roadside.
Load Lines:
Two (2) Steel sch 40 load lines, 1 mounted at each end of tank with adaptor and cap
Pluming:
3" inlet tubing 10 gauge steel. All valves and pluming on drive side of trailer
Blow down line:
(Top air) 3" steel line with 3" butterfly valve and mechanical relief valve. Top air line includes a 3" valve ti relief tank air with a 3" exhaust directed to the ground
Hose Tube:
One (1) Galvanized steel 8"x20' on curbside
Axles:
Two (2) 30,000 lbs. each, 120 in. wide, 77.5 in. track TP type with automatic slack adjuster. Brakes :Air brakes with booster FMVSS-121 ,ABS 4S/2M Bendix anti lock brake system
Tires:
Eight (8) 22.5 x 11R 16 ply.
Wheels:
All aluminum wheels 22.5" 10 hole budd.
Upper Coupler:
Adjustable 3/8 in. plate with Holland king pin at 49" height.
Access Ladder:
One (1) located on the driver side with handrails
External Coating:
Hempel two coats of polyurethane on an epoxy primer (4-6 mils DFT)
Landing Gear:
One (1) two speed Heavy Duty (80,000 lbs. total) with handle on driver's side.
Frame:
Full Length 3/16 in. STRENX high resistance formed steel (For lighter weight).
Fenders:
Four (4) Aluminum (front and rear)
Lights:
Sealed harness and recessed Optronics GloLights LED per DOT. Two (2) rear work lights with switch at rear Conspicuity tape : GRIOTE Per DOT
Mud Flaps
Four (4) Anti-sail
Air Storage Tank:
One (1) air tank
Bumper:
Formed steel. DOT approved.
Paint Prep:
All steel surfaces washed, degreased and shotblasted. External Coating: AXALTA two coats of polyurethane on an epoxy prime (4-6 mils DFT) Paint applied before electrical installation
Manways:
One (1) 20 in. sealed manways on top (Betts) with aluminum lid with hinge on the right
*Monthly payment stated above assumes a secured commercial use loan transaction available for highly qualified commercial loan applicants. Actual loan payment amount and terms may vary. Consumer financing not available for consumers residing in Nevada. Additional state restrictions may apply. Equal opportunity lender. Click here for more state licenses and disclosures. NMLS ID: 1857954. VERMONT RESIDENTS: THIS IS A LOAN SOLICITATION ONLY. CurrencyFinance IS NOT THE LENDER. INFORMATION RECEIVED WILL BE SHARED WITH ONE OR MORE THIRD PARTIES IN CONNECTION WITH YOUR LOAN INQUIRY. THE LENDER MAY NOT BE SUBJECT TO ALL VERMONT LENDING LAWS. THE LENDER MAY BE SUBJECT TO FEDERAL LENDING LAWS. CALIFORNIA RESIDENTS: Financing provided or arranged by Express Tech-Financing, LLC dba Currency pursuant to California Finance Lender License #60DBO54873
Your current browser cannot run our content, please make sure your browser is fully updated or try one of the browsers below.
Get Financing
