NEW ALDURA 200BBL ALUMINUM VACUUM TRAILER NON-CODE
Capacity:
8,400 gal. + 1% Expansion
Commodity:
Transportation of oilfield fluids such as water, mud, oil field waste.
Pressure:
Tested at 23 PSI
Relief Settings:
22 IN HG External, 17 PSIG Internal
Overall Length:
49 ft.
Height:
10 ft. 9 in.
Weight:
15,880 Lbs.
Width:
102 in
Material:
Aluminum 5454 H-32
Suspension:
Three (3) Air Ride 30K lbs each
Baffles:
Three (3) of 1/4 in. Thk
Bulkheads:
3/8" Aluminum 5454 H-0 Non-code ASME Shape
Compartments:
Single
Overturn Protection:
Three (3), at front, middle and back of tank
Shell:
1/4" aluminum shell 5454 H-32
Rings:
Thirteen (13) rolled of 4"x2" C-channel profile
Welding:
Inside and out, minimal tie-ins with mig welding
Connections:
3 in. vacuum female camlock fitting on middle top front bulkhead
Outlet:
2x 4" Butterfly Valves
Shut Off:
Ball type primary in front manway and ball type secondary 12 Gal. on driver's side front with drain
Venting/Reliefs:
1-1/2 in. vacuum relief, 2 in. pressure relief, both located at the top front of barrel, 2 in. blow down line at rear
Axles:
Three (3) 2x fixed and 1x lift rear axles; 30,000lbs ea; 120 in. wide, 77.5 in. Ferrous hub, cast drum, ABS
Brakes:
Air brakes with two boosters FMVSS-121, ABS 4S/2M module anti-lock brake system
Bumper:
3 in. X 6 in. tube per DOT
Sub-frame:
High Strenght Steel painted in aluminum color
Landing Gear:
2 speed JOST Heavy Duty
Tires:
Twelve (12) 11 X 24.5 R, mixed tires
Wheels:
Twelve (12) All-Aluminum 24.5"
Upper Coupler:
Bolt on adjustable 3/8" steel plate King Pin setting:18". King Plate height: 48"
Access Ladder:
One (1) safety driver side access ladder with handrails
Manways:
Three (3) on top of the tank, and one (1) on the rear bulkhead. All of 20 in. aluminum domed style with plates swing bolts and wing nuts
Walkway:
Driver side, with handrails, middle ladder, toe kicks, thru tread anti-slip walkway full-tank length, with rear ladder.
External Coating:
Hempel two coats of polyurethane on an epoxy primer (4-6 mils DFT)
Internal Liner:
Hempel 10-15 mil DFT epoxy liner
Paint Prep:
All steel surfaces sandblasted
Conspicuity tape:
3M Per DOT
*Monthly payment stated above assumes a secured commercial use loan transaction available for highly qualified commercial loan applicants. Actual loan payment amount and terms may vary. Consumer financing not available for consumers residing in Nevada. Additional state restrictions may apply. Equal opportunity lender. Click here for more state licenses and disclosures. NMLS ID: 1857954. VERMONT RESIDENTS: THIS IS A LOAN SOLICITATION ONLY. CurrencyFinance IS NOT THE LENDER. INFORMATION RECEIVED WILL BE SHARED WITH ONE OR MORE THIRD PARTIES IN CONNECTION WITH YOUR LOAN INQUIRY. THE LENDER MAY NOT BE SUBJECT TO ALL VERMONT LENDING LAWS. THE LENDER MAY BE SUBJECT TO FEDERAL LENDING LAWS. CALIFORNIA RESIDENTS: Financing provided or arranged by Express Tech-Financing, LLC dba Currency pursuant to California Finance Lender License #60DBO54873
Your current browser cannot run our content, please make sure your browser is fully updated or try one of the browsers below.
Get Financing
