575cf Pneumatic Dry Bulk Steel Trailer
Capacity: 575 cu. ft.
Commodity: Transportation of silica sand, limestone, cement and other bulk commodities.
Design Pressure: 15 PSI, tested at 23 PSI
Material: Steel
Suspension: Air Hendrickson 60,000 lbs. capacity.
Weight: 10,900 Lbs. approx.
Height: 12' 10".
Overall Length: 34'.
Width: 102"
Compartments: Single.
Shell: 10 Gauge A572-55 High resistance steel.
Welding: Inside and out, minimal tie-ins with automatic welding.
Hopper(s): One (1) cone with 45° slope. Lower fluidizer plate for easier material discharge.
Product Valves: One (1) 6" butterfly valve, steel body, cast iron disc and steel stem.
Discharge line: 4" discharge hose oriented to the rear.
Loading lines: Two (2) 4" loading lines in the rear with two (2) butterfly valves.
Pressure control: 3" butterfly valve to regulate hot airflow to product discharge line
Check valves: First check valve in the hot air inlet line, second check valve in front of first tee and third check valve in air line to solimar plate.
Hose holder: Hose holder located at front.
Pluming: 3" inlet tubing 10 gauge steel. All valves and pluming on driver side of trailer.
Top Air and Blow down line: Top air line includes a 3" relief valve with a 3" exhaust directed upward.
Hose tube: One (1) Steel 1x20' on curbside
Axles: Two (2) 30,000 lbs. each, 102 in. wide, 77.5 in. track TP type with automatic slack adjuster.
Brakes: Air brakes with two boosters FMVSS-121, ABS 4S/2M Bendix anti-lock brake system.
Air Storage Tank: One (1) air tank.
Bumper: Formed steel. DOT approved.
Frame: Full Length 3/16 in. Strenx high resistance formed steel (For lighter weight).
Landing Gear: Two (2) two speed Heavy Duty (80,000 lbs. total) with handle on driver's side.
Tires: Eight (8) 24.5 x 11R 16 ply.
Wheels: All steel wheels 24.5" 10 hole budd.
Upper Coupler: Adjustable 3/8 in. plate with Holland king pin at 49" height.
Access Ladder: One (1) located at driver's side with handrails and grab handles (For increased safety).
Manways: One (1) 20 in. sealed manways on top aluminum lid with hinge on the right.
Walkway: Not included.
Paint Prep: All steel surfaces washed, degreased and shotblasted.
External Coating: Hempel two coats of polyurethane on an epoxy primer (4-6 mils DFT). Paint applied before electrical installation.
Fenders: Four (4) Aluminum (front and rear)
Pressure gauges: Two (2) liquid filled, pressure range 0-30 psi located on street side on frame with light.
Tow feature: Two (2) "U" round bar welded to frame's rails.
Lights: Sealed harness and recessed LED per DOT. Two (2) rear work lights with switch at rear.
Conspicuity tape: 3M Per DOT.
Mud Flaps: Four (2) Anti-sail with IKON logo.
Optional Multiple configurations: A wide variety of discharge options, loading lines, piping arrangements, and multiple compartments
Paint Color: Available in a variety of different colors.
*Monthly payment stated above assumes a secured commercial use loan transaction available for highly qualified commercial loan applicants. Actual loan payment amount and terms may vary. Consumer financing not available for consumers residing in Nevada. Additional state restrictions may apply. Equal opportunity lender. Click here for more state licenses and disclosures. NMLS ID: 1857954. VERMONT RESIDENTS: THIS IS A LOAN SOLICITATION ONLY. CurrencyFinance IS NOT THE LENDER. INFORMATION RECEIVED WILL BE SHARED WITH ONE OR MORE THIRD PARTIES IN CONNECTION WITH YOUR LOAN INQUIRY. THE LENDER MAY NOT BE SUBJECT TO ALL VERMONT LENDING LAWS. THE LENDER MAY BE SUBJECT TO FEDERAL LENDING LAWS. CALIFORNIA RESIDENTS: Financing provided or arranged by Express Tech-Financing, LLC dba Currency pursuant to California Finance Lender License #60DBO54873
Your current browser cannot run our content, please make sure your browser is fully updated or try one of the browsers below.
Get Financing
