2026 LIDDELL 53 ft 51 ton
Description
102,000 Lb. distributed, 80,000 Lb. concentrated in 16'
53'' OAL X 108" wide
Approximately 16' full width wood filled upper deck, 16" KP setting, 96" swing clearance
Approximately 18 degree slope to main deck with 1 3/8" apitong
50" loaded 5th wheel height
Mount air, eletrical and hydraulic conections in center of bulkhead
Bent stlye D-rings on 4' centers
35" loaded deck height
Fabricated I-Beam main frame (2" maxl camber)
Fabricated I-Beam outer rail, with key slots on 2' centers
Crossmembers on 12" centers alternating between 6" or 8" and 4", with knee braces on 4' centers
1 3/8" nominal apitong decking, all decks excluding wheel covers
Full rear deck, covered wheels with 1/4" 100KSI
Two speed Jost landing gear, crank on drivers side
Three axle air ride suspension, 54.5" spacing, with 4S2M ABS
Air ride raise and lower kit with liquid filled pressure gauge
235/75R X 17.5 16 ply tires
8 hole pilot mount steel disc wheels, with outboard hubs
60" wood filled beavertail
12' X 42" Bi-fold wood filled PTO powered rear load ramps, with retaining straps
4" amber strobe lights with on/off switch
Grote multi diode LED sealed wire harness with additional clearance lights
4 way female electrical socket at rear of deck, wired to center pin
Media blast, epoxy prime, paint two part polyester urethane paint, Specifications
Year2026
ManufacturerLIDDELL
ConditionNew
Payload Capacity51 ton
CompositionSteel
Type of NeckFixed
SuspensionAir Ride
Floor TypeWood Floor
WheelsAll Steel
Number of Rear AxlesTri
Length53 ft
Width108 in
Year2026|
ManufacturerLIDDELL|
ConditionNew|
Payload Capacity51 ton|
CompositionSteel|
Type of NeckFixed|
SuspensionAir Ride|
Floor TypeWood Floor|
WheelsAll Steel|
Number of Rear AxlesTri|
Length53 ft|
Width108 in|
